AMSOIL DIRECT JOBBER
AMSOIL Engine Flush: In a new motor, with less than 20,000 miles, it is not necessary to flush engine. Engines with more than 20,000 miles, it is highly recommended to use AMSOIL Engine Flush if you have been running petroleum oil. What AMSOIL Engine Flush will do is remove the varnish and sludge deposits from the engine. Even if you have been changing the petroleum oil on a regular 3000 or 5000 mile interval, varnish will still accumulate in the engine. If AMSOIL Engine Flush is not used before using your AMSOIL Engine Oil, the AMSOIL Engine Oil will remove deposits from your engine, but the deposits will remain in your oil thus reducing the life of the oil. When you are ready to flush your engine, pour in one can of AMSOIL Engine Flush for every 4 to 6 quarts of engine oil capacity. Let the engine idle for about twenty minutes. For high mileage engines, you may want to increase idle time to thirty minutes and a slight increase in rpm’s will help circulate the oil more quickly and helping to dissolve heavy sludge and varnish deposits. Do Not Drive vehicle with AMSOIL Engine Flush in the engine. Drain the oil and remove the old oil filter. Install an AMSOIL Oil Filter and you are ready to pour in some AMSOIL Engine Oil. Do Not use AMSOIL Engine Flush in any motorcycle that has a wet clutch. The Engine Flush may damage the wet clutch. Oil Change Intervals: With AMSOIL, recommended oil change intervals for gas engines is one year or 25,000 miles, whichever comes first. Using AMSOIL filters, change filter at six-month or 12,000 miles intervals. Other filters must be replaced around 5000 miles. |